Our 30-meter long LED line® strip is a modern linear source of light dedicated for the illumination of interiors, public spaces and furniture lighting.
Make the installation easy
Thanks to the use of our 30m long rolls the installation of our LED line® strip will now be much easier and comfortable – the LED strip can be cut into any sections of the desired length. This solution will significantly reduce the amount of waste (unused strip) after the installation.
High quality for many years
The LED strip, equipped with 3528 LEDs, is featured by high lighting efficiency with low energy consumption of 4.8W per meter. Each single LED chip produces 7-8 lumens, thus 1m section will provide approximately 400lm. The longevity of each LED chip exceeds 50 000 hours and its total durability would reach about 100 000 hours.
The LED line® strip produces bright, daylight colour temperature of 3900-4175K, ideal for general and commercial lighting purposes.
All LED line® strips share some common features:
- double-sided adhesive, original 3M® tape guaranteeing easy and durable fixing of LED line® strip to the substrate.
- Flexible PCB laminate with optimum thickness which allows for diverse formation of LED strip whilst eliminating voltage drops.
- minimalistic size allowing for the strip to be installed in the most inaccessible areas
- option to cut the strip into sections of any length
- wide beam angle of 120°
- powered by 12V DC.
|Colour of the light:|
Color of light
|Luminous flux (meter):|
This parameter specifies the total power of light emitted from the 1-meter section of the LED strip. Luminous flux is determined unit (Φ). Its unit of measurement is the lumen (lm). Helpful in determining the overall brightness of the light source which is dependent on the value of luminous flux (lm) and the illumination angle (°).
|Luminous flux (30 meters):|
|LED quantity (meter):|
Parametr określający ilość umieszczonych diod LED na odcinku 1 metra taśmy.
|Number of LEDs (roll of 30 meters):|
4,8 W (+/- 5%)
|Power consumption (roll of 30 meters strip):|
This parameter specifies the type of LEDs used for the construction of the device. The designation "SMD" at the symbol means that the construction equipment is used diode paving (ang. Surface Mount Device).
|Power consumption - amperage (meter):|
This parameter specifies the range of power consumption for 1-meter long LED strip at a specified voltage. Unit expressed in amperes (A).
|Current (30 meters):|
Parameter specifies the focusing of the beam in degrees (°). Helpful in determining the overall brightness of the light source which is dependent on the value of luminous flux (lm) and the illumination angle (°).
The type of substrate used in the manufacture of strip.
biały laminat PCB
The color of the substrate used in the manufacture of the LED strip.
|Dimensions (L. x W x H.)::|
100 000 hours
|Lamp warm-up time to 60%:|
|Number of on/off cycles:|
|Luminous flux after 30 000 h:|
PWM dimmers only
|Package / collective packaging (quantity):|